Source: Askubuntu System-wide proxies in Ubuntu Studio, Xubuntu and XFCE must be set via environment variables Ubuntu Studio, like Xubuntu, uses the XFCE desktop environment which does not contain a graphical settings tool to set systemwide proxies (unlike the default Ubuntu desktop environment, Unity). 1. Set up the proxy/proxies for…
Source: swiftstack.com During the installation of Ubuntu on your server an IP address was most likely obtained automatically. This dynamic IP address assignment will need to be changed to a static IP address. This section will cover the simple network configuration changes needed to set a static IP network address…
Source: Linux Babe If you are running a Linux distro that uses Systemd, then you may find that your command in /etc/rc.local file would not run on system boot. This guide explains how to enable /etc/rc.local script to run on system startup. Enable /etc/rc.local on Systemd If you type the…
Source: wa8kim.com __________________________________________ How to install SVXLink on Raspberry Pi __________________________________________ # by WA8KIM / kim@kim125.com / EchoLink: WA8KIM-R / WiRESs-X: Rm#21149 / Last updated 03/20/2016. # http://www.wa8kim.com/rpi.html # Thanks to MANY uncredited contributers. # Best viewed in Notepad with Word Wrap OFF/UNCHECKED and in full screen Download the latest…
Source: ZR6AIC EchoLink on Ubuntu. (12.04) (Setting up Svxlink server and qtel) Svxling is a application that allows you to setup a Echolink link or a Echolink repeater on your server. You will need to build a interface between your computer Serial port and Mic and line in and outputs…
Source: f5vmr.wordpress.com SVXLink and Raspbian Stretch Installation from scratch Needed 1. Raspberry Pi B+, 2 or 3:1 16 Gb MicroSD Card: PC: USB Sound Card: Time Allotment: 60 Minutes Implementation Tip: You do not need to be an expert in Linux but in following this guide you will understand everything…
Source: Here If you run a live or home server, moving files between local machines or two remote machines is a basic requirement. There are many ways to achieve that. In this article, we talk about scp (secure copy command) that encrypts the transferred file and password so no one…
Installing on Debian If you are using the DEB version of webmin, first download the file from the downloads page , or run the command : wget http://prdownloads.sourceforge.net/webadmin/webmin_1.900_all.deb then run the command : dpkg –install webmin_1.900_all.deb The install will be done automatically to /usr/share/webmin, the administration username set to root…